Skip to content

Beta Marine Beta 38 service schedule

Inboard diesel ·

14 maintenance items for the Beta Marine Beta 38. The engine oil is changed every 250 h or 12 months. When an item has both an hour and a calendar interval, the one that comes first applies.

ItemEngine hoursCalendarRule
Daily or every 8 hours: engine oil, coolant, belt, leaks, seawater flow—before each use
First service: engine oil and filter, gearbox oilOnce, after running in.at 25 h, once—
Change the engine oil (shallow-sump engines)Shallow-sump variants only; standard sumps follow the yearly item.Only on some variants or when laid upevery 150 hevery yearwhichever first
Change the engine oil and the oil filterevery 250 hevery yearwhichever first
Clean or replace the air cleaner elementevery 250 hevery yearwhichever first
Inspect the raw-water pump impeller; replace if wornevery 250 hevery yearwhichever first
Replace the fuel filter elements and drain the pre-filterevery 250 hevery yearwhichever first
Check the drive belt tension and conditionevery 250 hevery yearwhichever first
Check the heat exchanger anode; replace if half wastedevery 250 hevery yearwhichever first
Change the gearbox oilevery 500 hevery 2 yearswhichever first
Change the coolantevery 500 hevery 2 yearswhichever first
Clean the heat exchanger tube stackevery 500 hevery 2 yearswhichever firstDealer
Check and adjust the valve clearancesevery 750 h—Dealer
Service the fuel injectorsevery 1500 h—Dealer
Add this schedule to my boat

Free in Voydar Helm: each interval becomes a maintenance task, due by hours or by date, whichever comes first.

Source

Beta Marine operator’s maintenance manual, heat-exchanger cooled range, maintenance schedule

Read from summaries of the maker's manual, not the manual itself.

Revision read: OM-221-20031-HE Rev 46 as cited by keeply.boats; manualslib copy of the BV1903 manual read 2026-10-12. Confirm against the current manual for your engine number.

Reference only. Intervals vary by serial number, use and climate; your engine's current manual and your dealer are the authority. Part numbers and diagrams are in the manual.