Skip to content

Wreck of MV Holmglen

New Zealand

Position
About 44.5° S, 171.6° E (within about 10 km)
Sank
—
Cause
—
Depth
—

Protection status

Location generalised as a precaution

The position shown is generalised to within about 10 km. The exact position is not published.

The year of loss is not recorded, so its age and protection status cannot be verified.

How this was decided: Voydar's protection rules, from the sources we hold, confidence 50%. When in doubt, Voydar generalises the position.

MV Holmglen II was a steel-hull coastal trader built in 1956 by Maartenshoek, Netherlands-based shipyard Bodewes Scheepswerven for the Holm Shipping Company of New Zealand. It was 485 gross register tons, had a max speed of 9 knots (17 km/h; 10 mph) and was powered by a four-cylinder diesel engine. On 23 November 1959, the ship left Dunedin, New Zealand, for Wanganui via Wellington, under the command of Captain Edward Joseph Eugene Regnaud. On the evening of 24 November, a mayday from Holmglen was received by the Taiaroa Head Signal and Radio Station, and a voice believed to be that of the captain reported, "am heeling heavily to port ... accommodation awash ... preparing to launch boat." The message was acknowledged by Taiaroa and answered by Holmglen, who said to stand by for further communication, but this was the last communication and she was not heard from again.

History from Wikipedia, licensed CC BY-SA.

About this wreck

MV Holmglen is a recorded shipwreck site. Voydar shows wreck locations alongside live ship traffic, free, from Wikidata and public hydrographic records.

Use this data

This page is also available as JSON, free, with the source and licence of every section. Sections whose sources do not permit redistribution are listed as withheld.

GET /api/v1/wrecks/30142
View JSONAPI documentationFree without a key for occasional use; use an API key for more.

Using this data in code?

Every account gets a personal API allowance: 2,500 credits a month free, 25,000 with Pro. Pro adds internal business use; API plans add building the data into your own products.

See plans