Skip to content

Wreck of HMS Dartmouth

Shipwreck site

Position
About 56.5° N, 5.6° W (within about 10 km)
Sank
—
Cause
—
Depth
—

Protection status

Location generalised to protect military remains

The position shown is generalised to within about 10 km. The exact position is not published.

The wreck of a military vessel.

This wreck may be the last resting place of those who died aboard. Please treat it with respect.

How this was decided: Voydar's protection rules, from the sources we hold, confidence 85%. When in doubt, Voydar generalises the position.

The Dartnouth was a fifth-rate warship of the Commonwealth of England's naval forces, one of six such ships ordered on 28 December 1654, all six from the state dockyards (the others were Norwich, Pembroke, Cheriton, Wakefield, and Oxford). She was built by Master Shipwright John Tippetts at Portsmouth Dockyard, and was launched on 22 September 1655 as a 22-gun fifth rate. She cost £1.693-5-od to build (or £6.10.0d per ton for a total of 2601⁄2 tons bm. She was named Dartmouth to commemorate the capture of that town by Parliamentary forces under Thomas Fairfax in January 1646. Her length was recorded as 80 feet 0 inches (24.4 metres) on the keel for tonnage calculation. The breadth was 24 feet 9 inches (7.5 metres) with a depth in hold of 10 ft 0 in (3.0 m). The tonnage was thus calculated at 26062⁄94 bm tons.

History from Wikipedia, licensed CC BY-SA.

About this wreck

HMS Dartmouth is a recorded shipwreck site. Voydar shows wreck locations alongside live ship traffic, free, from Wikidata and public hydrographic records.

Use this data

This page is also available as JSON, free, with the source and licence of every section. Sections whose sources do not permit redistribution are listed as withheld.

GET /api/v1/wrecks/30069
View JSONAPI documentationFree without a key for occasional use; use an API key for more.

Using this data in code?

Every account gets a personal API allowance: 2,500 credits a month free, 25,000 with Pro. Pro adds internal business use; API plans add building the data into your own products.

See plans